HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 117)

Using the Camera Features 10–14
Once HP Image Transfer has been installed and is recognized by
ActiveSync, the ActiveSync window displays the Image check box.
To enable and modify HP Image Transfer settings:
1.
Open ActiveSync on your personal computer, if it is not
already open.
2. Double-click Image under the Details window or select Options
from the ActiveSync menu.
3. Select Image on the Sync options tab, and then select the
Settings button.
NOTE: Once image transfer has been enabled, the schedule and rules
you have configured for ActiveSync synchronization are also applied to
your image transfers. Depending on your configuration, images may be
transferred continuously while the device is connected, only upon
connection, or manually.
HP iPAQ Image Transfer allows the transferring of images in the
following ways:
•
Mobile Device — displays the location of the images you want to
transfer from your HP iPAQ. Also, if you want to transfer images
from storage cards, check the Include camera images on
storage cards check box.
• The Computer — allows you to create subfolders on your desktop
computer where images can be saved. For example, you can
configure the images to be transferred to a subfolder with the same
name as the folder on your HP iPAQ. If you are transferring images