HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 120)

Expansion Cards 11–2
Installing a Secure Digital (SD) Expansion Card
To install an SD, SDIO, or a mini-SD expansion card into the expansion
slots on the HP iPAQ:
1.
Locate the two slots on the right side of the HP iPAQ.
2. Insert the expansion card into the appropriate expansion slot and
push the connection edge of the card firmly into the expansion slot
until you hear a double click. When you hear the double click, the
card is locked in place. If the card is not locked, it can pop out of
the expansion slot.
NOTE: Be sure the expansion card label is facing the front of the
HP iPAQ before inserting it.
The top expansion slot 1 is the SD slot with SDIO functionality. It can be
used with various types of data cards and provides data exchange
functionality such as Wi-Fi. The bottom expansion slot 2 is the mini-SD slot
and can be used only with storage cards.
CAUTION: Do not insert a mini-SD card into the SD slot or attempt to
insert an SD card into the mini-SD slot.
NOTE: If your expansion card is not recognized, follow the card
manufacturer’s instructions to install it.