Editing wap information settings, Creating a new connection, Creating a new connection –2 – HP iPAQ hw6500 Unlocked Mobile Messenger series User Manual
Page 69
Using the Phone Features
5–22
2.
Enter the following information:
• APN: Access Point Name of the MMS server being connected.
• Name: Log on name for the MMS server.
• Password: Password for the MMS server.
3.
Tap OK.
4.
Enter the IP address and the Port number for the WAP MMS
Gateway and tap Finished.
Editing WAP Information Settings
If you tap WAP Information on the Edit properties screen:
1.
Enter the IP address and the Port information for the WAP Gateway.
2.
Tap Next.
3.
Enter the IP address and the Port information for the secure
WAP Gateway.
4.
Tap Finish.
Creating a New Connection
Before creating a new connection, you must obtain the following
information from your service provider:
•
To make a GPRS Connection:
• APN
• Username/Password
• DNS address
• IP address
•
To make an MMS Connection:
• MMS Center Address
• APN (for MMS server if different than Internet connection)
• User Name/Password
• IP Address/Port
•
To make a WAP connection:
• IP Address
• Port
• WAP Gateway
• Secure WAP Gateway—IP and Port
To create a new connection:
1.
Tap the down arrow under Country and select the appropriate
country name.