HP ProLiant ML350e Gen8 Server - Manual (Page 84)

Hardware options installation 84
13. Connect the mini-SAS cables to the drive backplane.
14. Connect the Mini-SAS cables to the Smart Array controller.
NOTE: For more information about connecting the cables to Smart Array controller, see the
documentation that ships with Smart Array controller option kit.
15. Connect the power cable that came with the RPS option kit (HP part number 676745-001), from the
optional drive cage backplane to the RPS backplane connectors.
16. Install the fan cage and connect the fan cables to the system board.
17. Install the full-length PCI cards removed.
18. Install the system air baffle (on page 30 ).
19. Install the PCI air baffle (on page 29 ), if removed.
20. For tower models, do the following:
a. Install the access panel (on page 26 ).