GE ZEK938SMSS - Manual (Page 7)

Oven Control, Clock & Timer
Wall Oven
Features of
your oven
control,
clock and
timer
1 BAKE. Press to select the bake function.
2 BROIL HIGH/LOW. Press to select the broil
function.
3 CONV BAKE/MULTI. Press to select baking
with convection on multiple racks.
4 CONV BAKE/1 RACK. Press to select baking
with convection on one rack.
5 CONV ROAST. Press to select roasting with
convection.
6 WARM/PROOF. Press once for warming or
twice for proofing. See the How to Set the
Oven for Warming section and the How to Set
the Oven for Proofing section.
7 START. Must be pressed to start any cooking
or cleaning function.
8 DISPLAY. Shows the operations you have
selected, the time of day and the cooking
or cleaning status.
If “F – and a number or letter” flash in
the display and the oven control signals,
this indicates function error code. Press
the CLEAR/OFF pad. Allow oven to cool for
one hour. Put the oven back into operation.
If function error code repeats, disconnect
power to the oven and call for service.
9 COOK TIME. Use for Timed Bake, Timed
Convection Bake and Timed Convection
Roast operations.
10 DELAY START. Use along with the
COOK TIME or SELF CLEAN STD/LOW
pads to set the oven to start and stop
automatically at a time you select.
11 SELF CLEAN STD/LOW. Press to select the
self-cleaning function. See the Using the Self-
Cleaning Oven section.
12 PROBE. Press when using the probe to
cook food.
13 OVEN LIGHT ON/OFF. Press to turn the oven
lights on or off.
14 CLEAR/OFF. Press to cancel any oven
operation except the clock and timer.
15 TIMER ON/OFF. Press to select the timer
function. The timer does not control oven
operations. The timer can time up to 9 hours
and 59 minutes.
16 NUMBER PADS. Use to set any function
UHTXLULQJQXPEHUV³IRUH[DPSOHWKHWLPH
of day on the clock, the timer, the oven
temperature, the internal food temperature,
the starting and length of cooking time for
Timed Bake and the starting and length of
cleaning time for Self-Clean.
17 CLOCK. Press to enter the time of day.
Double oven control shown. (Appearance may vary.)
Tones
The control has a series of tones that will sound
at different times. These tones may sound while
you set the control for an oven function or at the
end of the oven function. They will also alert you
when an incorrect time or temperature has been
entered or if there is a problem with the oven.
When you press a touch pad, you will hear a
beep. This beep will let you know you have placed
enough pressure on the pad to activate it.
When you set an oven temperature, the
oven automatically starts to heat. When the
temperature inside the oven reaches your set
temperature, a tone will sound to let you know to
place the food in the oven.
An attention tone will sound if you set an invalid
function or try to set an additional function. The
tone can be quickly identified by watching the
display messages.
7