Asus P1-AH1 - Manual (Page 77)

5-17 ASUS Pundit P1-AH1
Plug & Play O/S [No]
Select [Yes] if you are using a Plug and Play capable operating system.
Select [No] if you need the BIOS to configure non-boot devices.
Configuration options: [No] [Yes]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot
device. Configuration options: [PCI] [Onboard] [PCI-E]
Resources Controlled By [Auto]
When set to [Auto], the BIOS automatically configures all the boot and
Plug and Play compatible devices. Set to [Manual] if you want to assign
the IRQ DMA and memory base address fields. Configuration options:
[Auto] [Manual]
5.4.3 PCIPnP
The items in this menu show the PCIPnP configuration settings. Select an
item then press <Enter> to display a pop-up menu with the configuration
options.
Plug & Play O/S [No]
Primary Display Adapter [PCI-E]
Resources Controlled By [Auto]
x IRQ Resources
** PCI Express relative items **
Maximum Payload Size [4096]
Select Menu
Item Specific Help
Select Yes if you
are using a Plug and
Play capable
operating system.
Select No if you
need the BIOS to
configure non-boot
devices.
PCIPnP