Asus P1-AH1 - Manual (Page 79)

5-19 ASUS Pundit P1-AH1
5.4.4 Onboard device configuration
The items in this menu show the onboard device configuration settings.
Select an item then press <Enter> to display a pop-up menu with the
configuration options.
IDE Function Setup
USB Configuration
Onboard NV LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard IEEE 1394 [Enabled]
HD Audio [Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [Standard]
x ECP Mode Use DMA 3
Select Menu
Item Specific Help
Press [Enter] to
set.
Onboard Device Configuration
IDE Function Setup
OnChip IDE Channel0 [Enabled]
IDE DMA transfer access [Enabled]
SATA Port 1, 2 [Enabled]
SATA DMA transfer [Enabled]
IDE Prefetch Mode [Enabled]
Select Menu
Item Specific Help
Disable/Enable
OnChip IDE Channel
O.
IDE Function Setup
OnChip IDE Channel0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller.
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access function.
Configuration options: [Disabled] [Enabled]