Asus P1-AH1 - Manual (Page 90)

5-30 Chapter 5: BIOS setup
5.6.6 Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
OS Select for DRAM > 64 MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating
system with an installed RAM of greater than 64 KB. Configuration
options: [Non-OS2] [OS2]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Enabled] [Disabled]
Make sure that the Full Screen Logo item is set to [Enabled] if you wish
to use the ASUS MyLogo2™ feature.
Halt On [All, But Keyboard]
Sets the system to halt on errors according to the system functions
specified in each option. Configuration options: [All Errors] [No Errors]
[All, But Keyboard]
Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Security Chip [Disabled]
Item Specific Help
Supervisor password
controls full
access, <Enter> to
change password.
Select Menu