Asus PIKE 2008 - Manual (Page 24)

2-10 Chapter 2: RAID configuration
2.2.3 RAID 0 volume
The RAID 0 feature supports volumes with two to ten disks. You may combine an
RAID 0 volume with an RAID 1 or RAID 1E/10 volume.
To create a RAID 0 volume:
1. Follow steps 1–4 of the section RAID 1 volume.
2. The Select New Volume Type screen appears.
Use the arrow keys to select Create RAID 0 Volume, then press <Enter>.
3. The Create New Volume screen shows the disks you can add to make up
the RAID 0 volume. Use the arrow key to select a disk, then move the cursor
to the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose volume type to create
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Select New Volume Type -- SAS2008
Create RAID 1 Volume Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on
volume disks will be DELETED!
Create RAID 1E/10 Volume Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks including up
to 2 optional hot spares. ALL DATA on
volume disks will be DELETED!
Create RAID 0 Volume Create a RAID 0 volume consisting of
2 to 10 disks. ALL DATA on
volume disks will be DELETED!
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for volume C = Create volume
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Create New Volume -- SAS2008
Volume Type: RAID 0
Volume Size(GB): -------
Slot Device Identifier RAID Drive Pred Size
Num Disk Status Fail (GB)
0 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
1 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
2 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
3 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74