Asus PIKE 2008 - Manual (Page 44)

2-30 Chapter 2: RAID configuration
To access servers on a different subnet, type in the box at the bottom of the
screen the IP address of a server in the desired subnet where the MegaRAID
Storage Manager software is running, and click Update. If you check the
Connect to remote server at: IP address box, you can also access a
standalone (remote) installation of MegaRAID Storage Manager software, if it
has a network connection.
3. Double-click the icon of the server that you want to access. The Server Login
window appears, as shown in the following figure.
4. Select an access mode from the drop-down menu.
– Select Full Access if you need to both view the current configuration
and change the configuration.
– Select View Only if you need to only view and monitor the configuration.
5. Enter your user name and password, and click Login.
If the computer is networked, this is the login to the computer itself, not the
network login.
You must enter the root/administrator user name and password to use Full
Access mode. If your user name and password are correct for the Login
mode you have chosen, the main MegaRAID Storage Manager window
appears.