3 card layout, 4 system requirements, Card layout -3 – Asus PIKE 2008 User Manual
Page 9: System requirements -3
ASUS PIKE 2008
1-3
1.3
Card layout
The illustration below shows the major components of the RAID card.
1.4
System requirements
Before you install the PIKE 2008 SAS RAID card, check if the system meets the
following requirements:
•
Workstation or server motherboard with a PIKE RAID card slot
•
SAS or SATA hard disk drives
•
Supporting operating system:
Windows
®
and Linux operating systems (refer to website for details)
•
Other requirement:
- Appropriate thermal solution
- Certified power supply module
1. ASUS PIKE interface-1: PCI-E x8
2. ASUS PIKE interface-2: 8-port SAS signal with SGPIO interface*
3. SAS RAID card status LED (lights up and blinks to indicate that the card is
working normally)
* The SGPIO interface is used for visibility into drive activity, failure and rebuild
status, so that users could build high-performatnce and reliable storage
systems. Refer to the motherboard manual for detailed information about using
the SGPIO connectors on the motherboard.
2
2
1
1
3