Asus PIKE 2008 - Manual (Page 30)

2-16 Chapter 2: RAID configuration
Activating a volume
If a volume is removed from one controller/computer or moved to another, the
volume is considered inactive. When you add the volume back to the system, you
may reactivate the volume.
To activate the volume:
1. From the Manage Volume screen, select Activate Volume, then press
<Enter>.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Manage Volume -- SAS2008
Identifier LSI Logical Volume 3000
Type RAID 1
Size(GB) 73
Status Optimal
Task None
Manage Hot Spares
Consistency Check
Activate Volume
Delete Volume
Online Capacity Expansion
2. The below screen appears. Press <Enter> to activate a RAID volume.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Manage Volume -- SAS2008
This field is used to activate a RAID volume.
This field is grayed out under the following conditions:
- The volume is currently active.
- Activating the volume would exceed the maximum number of
active volumes allowsed.
- Activating the volume would exceed the maximum number of
RAID disks allowed.
- The volume has incompatible metadata on it.