Aastra Telecom SIP9133i - Manual (Page 14)

10
described in the following section. After all
parties are connected, you can hang up,
leaving the remaining two parties connected.
See your system administrator for more
information.
Conferencing Calls
The 9133i phone system supports up to 3
parties (including yourself) in a conference
call.
To create a conference call :
1. Connect to the first party you wish
to include in the conference (if not
already connected).
2. Press . A new line opens.
3. Enter the extension number, or dial
the outside number of the person
you wish to add to the conference.
4. Wait for the new party to answer.
You can consult with the new party
first before adding them to the
conference.
5. To add the new party to the
conference, press again.
6. To drop a party from the
conference, press once
more.
You can use the keys to
scroll through and see the numbers and
names (if available) of the parties in the
conference call.
To conference two calls you are
already connected to:
1. Begin with active calls on two
different lines.
2. Press . A new line opens.
3. Press the line key of the call
you wish to conference
with.
4. Press again. The
two lines link into a
conference call.
NOTE : When a name is
displayed, pressing drops the
displayed party from the call.
Ending Calls
To end a call, you first need to reconnect to
the call if not already connected (for
example, if your caller is on hold). Press
the button to end the call. If
connected through the handset, you can
also place the handset back on hook to end
the call.
Handling Calls