Aastra Telecom SIP9133i - Manual (Page 16)

12
4. Press . At the “Enter
Name” prompt, use the dial pad to
select the letters. Continue to press
the number key to access the next
letter for that key (for example,
press 2 three times to access C).
Press
to move to the next space,
or wait a moment and the cursor
automatically advances. To insert a
space between letters, press
. To
backspace and erase a mistake,
press
or Delete.
5. Press to finish.
Editing in Directory
To edit a listing in your directory:
1. Press .
2. Access the entry you want to edit by
pressing the first letter of the name
on the dial pad, and
to
scroll through the list.
3. To begin editing Press . Press
again to erase the numbers or letters
to the left or use the dial pad to
enter additional digits or characters
once you have saved the number. If
you don't want to change the
number or name just press
at any time to exit.
4. Press to finish.
NOTE : In the name field of editing mode, the
‘1’ key accesses various characters for adding
entries such as URLs and IP addresses. The
table below illustrates the characters that can be
accessed through this key, in the order in which
they appear
on-screen (for example, press the
‘1’key three times while in the name field to
add periods to an IP address).
Deleting Items from Directory
There are two ways to delete calls
from your directory.
To delete items one by one:
1.Press .
2.Press to find the
item you want to delete
3.Press , then
again at the prompt to erase
the item.
To delete all items in the
directory:
1. Press .
2. Press , then again at
the prompt to erase all items
Callers List
The Callers list is a stored log of your
incoming calls. The 9133i telephone stores
information on up to 200 incoming calls in
the Callers List. Your telephone logs the
number and name (if available) of the
caller, when they last called, and the
number of times they tried to reach you.
When the Callers List is full, the oldest call
records are deleted to accommodate the
information of new callers.
Managing Calls