Brewer Element Treatment 2230/2240 - Manual (Page 12)

Document 101294 RevA Printed in USA © 2010 12
MODELS 2230 and 2240 STEP 9
Screw A
Screw B
Foot End
Rounded
Corner Back Section
Backrest Bracket
STEP A: Rotate Back Section until Backrest Bracket is engaged or top is horizontal on frame.
STEP B: Set upholstery bottom on frame, with Rounded Corners placed at the Foot End of the table.
STEP C: Install Screw A (1/4”-20 x 4”) through frame and into upholstery.
STEP D: Install 2 Screws B (1/4”-20 x 2”) through frame and into upholstery.
STEP E: Tighten Screws.