Brewer Element Treatment 2230/2240 - Manual (Page 6)

Document 101294 RevA Printed in USA © 2010 6
MODELS 2230 and 2240 STEP 3
STEP A: Remove 2 Upper Leg Screws at Head End of the table, one on each of the two legs. (See illustra-
tion above.)
STEP B: Insert Caps into two leg tops and seat with a rubber mallet.
STEP C: Install Upper Leg Screws. Do not tighten at this time.
Tab
Caps
Upper Leg Screws
Head End