Brewer Element Treatment 2230/2240 - Manual (Page 13)

Document 101294 RevA Printed in USA © 2010 13
Screw B
Snap Rivet
Side Plate
Lower Shelf Support
Shelf
Snap Rivet
Snap Rivet
STEP A: Loosen Screws B at the foot of the table where indicated just enough to allow installation of the
Side Plate.
STEP B: Mount Side Plate so that the slots of the plate straddle the Screws B that were just loosened.
STEP C: Press the top of the Side Plate up against the frame and align the top hole of the plate with the
hole in the frame. Insert Snap Rivet into the aligned holes.
STEP D: Retighten Screws B.
STEP E: Insert the Shelf through either end of the table. Positon the Shelf so that the locating blocks, on
the bottom of the Shelf, are straddling the Lower Shelf Support.
STEP F: Install Snap Rivets into unused holes in legs and frame.
MODELS 2230 and 2240 STEP 10