Brewer Element Treatment 2230/2240 - Manual (Page 14)

Document 101294 RevA Printed in USA © 2010 14
Leveling the Table (Figure A)
A Leveling Screw Pad is located at each corner under the
table’s base. Adjust the four Leveling Screw Pads, by turning
them up or down, to achieve a solid, level installation.
Installing the Paper Roll (Figure B)
Slide the Dowel Rod through the paper roll and hang
the Dowel Rod on the J-Bolts. Ensure a secure fit before
using the paper roll dispenser.
Figure A
INSTALLATION
Leveling Screw Pad
Dowel Rod
J-Bolt R
Figure B
CAUTION
MAXIMUM LOAD
15 LBS. PER DRAWER
Drawer Slide Positioning
Incorrect Positioning
Correct Positioning
To install drawers, pull drawer slides forward and align the slots of the drawer-mounted slides to their
mate on the frame. Push the drawers inward until they reach their fully-closed position.