Avaya 1692 IP - Manual (Page 14)

Chapter 2: Using Your Avaya 1692 IP Conference Phone
14 1692 IP Conference Phone User’s Guide Nov 2009
Receiving Calls
Your call status LEDs blink green as the incoming call rings.
To receive a call:
●
Press the Call key.
The call is listed with any other ongoing calls that might be displayed.
Ending Calls
To end a call, do one of the following:
●
To terminate a call, press the Call key.
The status LEDs turn off.
●
To terminate a call and obtain a dial tone to start a new call, press the Drop soft key.
Call Handling Features
The features described in this section are available while calls are in progress.
Setting Up Conferences
To set up a conference:
1. During a call, press the Conf soft key (you might need to press the More soft key first, if
Conf is not visible).
The call is placed on hold, and you receive a dial tone.
2. Dial the number of the third party in the conference.
3. Once the call is established, press the Conf soft key again to join the third party.
A conference is established.
Note:
Note:
You can automatically set up a conference without completing step 3. After you
complete step 1, press the Conf soft key. Then, complete step 2. When the third
party answers the phone, a conference is automatically created.