Avaya 1692 IP User Manual

Page 25

Advertising
background image

Resetting and Power Cycling the 1692 IP Conference Phone

1692 IP Conference Phone User’s Guide

Nov 2009

25

Resetting and Power Cycling the 1692 IP Conference
Phone

Reset your phone when other troubleshooting suggestions do not correct the problem or after
being advised to do so by your system administrator. The basic reset procedure can resolve
most problems.

Characters do not appear

on the Display screen

See

Phone does not activate after a power interruption

, above.

Check all lines into the phone to ensure that it is properly

connected.

Check the power source to ensure that your phone is

receiving power.

If these suggested solutions do not resolve the problem, reset or

power cycle the phone with your system administrator’s

assistance.

Audio quality is poor.

Specifically, you hear an

echo, static, sudden

silences (gaps in speech),

clipped or garbled speech.

Various network problems might be causing the problem.
Contact your LAN Administrator with as complete a description

of the problem as possible.

No dial tone

Ensure that the cords into the phone are securely connected.

Note that there might be a slight operational delay if you unplug

and reconnect the phone. Reset or power cycle the phone with

your system administrator’s assistance.
Contact your system administrator if these steps do not produce

the desired result.

Phone does not ring

Use the Up/Down Volume keys to set your ringer volume to a

higher level. Verify that the “Do Not Disturb” feature is turned off,

using the Select key and the Up/Down Scroll keys to scroll down

to that item. From another phone, place a call to your extension

to test the ringer volume.

A feature does not work as

indicated in this guide (for

example, the Redial key

does not operate as

described)

Verify the procedure and retry. For certain features, you must

place the phone off-hook first.
Contact your system administrator if this action does not

produce the desired result. Your phone system might have been

specially programmed for certain features applicable only to

your installation.

All other IP Phone

problems

Contact your system administrator.

Problem/Symptom

Suggested Solution

Advertising