AMX ENV-VST-C - Manual (Page 38)

Programming
32 ViewStat Color Communicating Thermostat
Entering Location by Zip Code
To enter a location by Zip code:
1. Press Setup Location on the Main page to navigate to the Select Location page (FIG. 22).
2. Select Enter Zip Code. A pop-up screen opens.
3. Enter the 5-digit zip code.
4. Press Done.
Pressing Done returns you to the Select Location page and displays the corresponding city at the top of
the page.
Entering Location by Station ID
To enter a location by Station ID:
1. Press Setup Location on the Main page to navigate to the Select Location page (FIG. 22).
2. Select Enter Station ID. A pop-up screen opens.
3. Enter the 4-character Station ID.
4. Press Done.
Pressing Done returns you to the Select Location page and displays the corresponding city at the top of
the screen.
Changing Temperature Units
To change temperature units:
1. Press Setup Location on the Main page to navigate to the Select Location page (FIG. 22).
2. Select Display Units. The Unit Selection menu opens with a series of options.
3. Select Fahrenheit or Celsius.
Next time a weather refresh occurs the units will be updated.
Changing Wind Speed Units
To change wind speed units:
1. Press Setup Location on the Main page to navigate to the Select Location page (FIG. 22).
2. Select Display Units. The Unit Selection menu opens with a series of options.
3. Select Miles per hour (mph), Kilometers per hour (kph), or Knots.
Next time a weather refresh occurs the units will be updated.
Changing Pressure Units
To change pressure units:
1. Press Setup Location on the Main page to navigate to the Select Location page (FIG. 22).
2. Select Display Units. The Unit Selection menu opens with a series of options.
3. Select Inches of Mercury (inHg), Millimeters of Mercury (mmHg), or Millibars.
Next time a weather refresh occurs the units will be updated.