Argosy Research Mobile Video HDD - Manual (Page 10)

6
Using the AV Playback Function
Using Composite Stereo Audio Output
To output the stereo audio signal, refer to Fig. 1, connect this connector to TV or AV
amplifier (receiver).
Using Coaxial Output Digital Audio
To output the digital audio signal, connect this connector to an AV amplifier (receiver) which
equips a Dolby Digital decoder. You will get the multi-channel sound effect.
The Coaxial cable is
not provided
INPUT
Power Connection
1. Connect the plug of the AC adapter to the connector marked “DC IN”, plug the other end
into the electrical outlet.
2. Press the Power button and the blue LED will light up. Now the unit is in standby mode. You
can press (STANDBY) button on the remote to activate the unit for playback, or, press
the same button to go back to standby mode.
n
p
o
Blue LED lights up