Argosy Research Mobile Video HDD - Manual (Page 22)

18
Using the AV Playback Function
DVD Subtitle
Select the language for the default subtitle when playing a DVD movie.
If “OFF” is selected, the subtitle will not be displayed when play back.
Audio Setup
This sub-menu can be set only after the
playback is stopped.
DOWNMIX
Set this function when output audio
signal via Composite connector:
LT/RT : Outputs the left or right
channel to both channels.
Stereo : Outputs stereo audio.
SPDIF Output
Outputs the Dolby digital sound via the Coaxial connector. After enabling this function,
the Composite connector will not output the audio signal.
OFF : Outputs audio via Composite, and disables the digital audio output.
SPDIF/RAW : Outputs the digital audio without decoding.
SPDIF/PCM : Converts the multi-channel digital sound to stereo and then output.
PRO LOGIC
This function only works if you have selected “SPDIF/RAW”.
If the movie contains PCM stereo sound, after enabling this function and connected to an
AV amplifier (receiver) which is equipped with a Dolby decoder, the output sound will be
simulated as the multi channels sound. There are 3 options: “OFF”, “ON” and “AUTO”.
LPCM Output
This function only works if you have selected “SPDIF/PCM”.
LPCM 48K : The sampling rate of the digital audio output will be limited at 48KHz.
LPCM 96K : The sampling rate of the digital audio output will be limited at 96KHz.