PowerTap SL 2.4 - Manual (Page 11)

365
25
58.I0
WATTS
3
D
2.4
General Computer Operation
DISPLAY LEVELS
The computer has three (3) main display levels:
Top Power
Middle Speed
Bottom Multi-Function
NOTE: These locations only apply to trip and
interval modes and do not apply to Cycle
Computer
or Heart Rate Monitor Function . See COMPUTER SETUP 4
to customize display options.
DISPLAY MODES
The computer has two (2) main modes of operation:
1) Trip
2) Interval
Hold [MODE] to toggle between display modes.
BUTTONS
There are two (2) buttons on the computer:
1) [Mode]
2) [Select]
NOTE: [BRACKETED] words indicate buttons.
There are five (5) types of button presses:
1) Press [MODE] or [SELECT] - a single press and release of either [MODE] or [SELECT].
Used for entering different modes and navigating functionality.
11
TRANS.
ICON
INTERVAL
DISPLAY
MODE (LEFT)
POWER
DISPLAY
SPEED
DISPLAY
MULTI
DISPLAY
BOTH SELECT
Changes active
mode Clear data
Enter setup Select function