PowerTap SL 2.4 - Manual (Page 40)

·Torque value is not zeroed to manually zero torque go to current watts and hold down the
select button until watts disappears. Torque is now being displayed. To zero torque hold down
the select button until the value reads zero. To exit torque mode press select once. If read zero
the torque does not seem to recalibrate the unit call Saris Cycling Group customer service at
1-800-783-7257.
Speed seems incorrect
· Wheel size incorrect -refer to the chart on page 25 and enter the correct size in setup mode.
Transmission icon flashes rapidly
· Hub batteries need replacement - replace the hub batteries as shown on page 34 of
the User Manual.
40