Auto Page RF-520LCD - Manual (Page 10)

10
SYSTEM’S STATUS CHECK
(For two-way transceiver operation only)
When you want to check the system’s present status through the
LCD screen, Press the transceiver
button twice, within 3
seconds press (C) button. It responds with one melody sound,
the LCD screen should be illuminated.
Note: If it has no responds then you are out of range.
DRIVER PAGING
(For two-way transceiver operation only)
It is useful the event that someone wants to page the driver of the
parked vehicle.
Under the ignition switch “off” condition, press and hold the valet
switch for 2 seconds or press the pager button once on the
transmitter antenna to page the driver, one chirp sound shall be
emitted from the vehicle and the paging melody sound continues
you Remote LCD transceiver and “ ” indication flashes on the
LCD screen.
DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm with a unique feature which will turn on your vehicle dome light as
following:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the dome light will flash for the same duration as the siren.
Note: Turn on the ignition switch or arm the alarm will turn off the dome light.
IGNITION CONTROL DOOR LOCK/UNLOCK.
If the vehicles door locks have been interfaced to the security system, the system will
automatically lock the vehicle's doors when the ignition is turned “ON” and /or unlock
the vehicle’s doors when the ignition is turned “OFF”.
TRUNK RELEASE OUTPUT.
Press and hold button on the transmitter for 2 seconds to
remote control the trunk release or other electric devices.
CHANNEL 3 AUXILIARY CONTROL OUTPUT (Available Option)
Press the transmitter button to active Channel 3 function. Channel 3 is a
programmable output. This feature, when installed with optional accessories, may be
used to operate power windows, sunroofs, etc. from your remote transmitter.
CHANNEL 4 AUXILIARY CONTROL OUTPUT (Available Option)
Press the transmitter + button to active Channel 4 function. Channel 4 is a
programmable output. This feature, when installed with optional accessories, may be
used to operate power windows, sunroofs, etc. from your remote transmitter.