Auto Page RF-520LCD User Manual
Page 14
14
Screen Lamp ON: Press and hold the
button one second, with
one melody sound and the LCD screen lamp will turns on for 5 sec.
Power Save Mode: While the power save mode, the LCD remote
transceiver uses “0” current to save the battery power.
Entry: Press & hold the
button for 5 seconds, with one melody
sound and
icon on the LCD screen to indicate entry the
“power save mode”.
Exit: Press any button of the LCD remote transmitter to exit the
“Power Save Mode”.
Clear the Flash Icon and Melody Sound: Press the
button 3 times within 3
seconds will clear the flash icon and melody sound on the LCD screen transceiver
Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will
alert user through melody sound and flashing trigger icon, press any button on the
LCD remote transmitter to stop melody sound only.
Button Lock: It is useful if you want to disable the transmission
function of the remote control temporarily to prevent from any
inadvertent pressing of buttons by others. Press the
button first,
within 3 seconds press and hold the
( ) button for 2 seconds to
activate or cancel the button lock function, the icon will displayed
on the LCD screen to show the LCD remote transmitter is on “Button
Lock”.
Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear beep
sound from the remote control as the remote control in this mode,
vibrates itself if your security system is triggered.
Press the
button first, within 3 seconds press and hold the
(
) button for 2 seconds to select the mode of vibration or melody,
the
icon will displayed on the LCD screen to show the LCD
remote transceiver is on vibration mode.
Enable / Disable Bi Sound While Pressing Button:
It has a short “bi” sound while pressing the button of the LCD screen transceiver
If you want mute the “bi” sound mute always while press button. Press the
button
first, within 3 seconds press and hold the
(Bi) button for 2 seconds to disable the
“bi” sound.
Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash
icon while pressing the button of the LCD screen transceiver.