Panic function – Auto Page RF-520LCD User Manual

Page 8

Advertising
background image

8

TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver’s

door only when disarming the security system. Pushing the

button a second time

within 3 seconds will unlock the other doors.
AUTOMATIC RE-ARM : If this feature is selected, the security system will
automatically re-arm itself in 60 seconds after disarming with remote transmitter.
Automatic rearm will cancel if any door is opened before the 60 seconds timer has
elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 10 seconds press the valet switch.

The alarm will stop sounding and enter the disarm mode, release the valet switch.
You can now start and operate the vehicle normally.

VALET MODE: (System in Disarm or Valet mode)

The valet switch allows you to temporarily bypass all alarm function, eliminating the
need to hand your transmitter to parking attendants or garage mechanics. When the
system is in valet mode, all alarm function are bypassed, however the remote panic
feature and remote door locks will remain operational. To use the valet mode, the
system must first be disarmed either by using you remote transmitter, or by operating
the Manual override sequence.

Enter Valet Mode:
1. From the disarmed condition, turn the ignition

to “ON” position.

2. Push and hold valet switch for 3-5 seconds

until the LED turns on. The LED will remain on as
long as the system is in 'valet mode'.

Exit Valet Mode:
1. Return to normal operation, turn ignition 'on'

Remote Door Lock

Remote Door Unlock

2. Push and hold valet switch for 3-5 seconds, The LED

will turn off indicate the system are exiting the valet mode.

CAR LOCATOR

Upon armed, press the button to active car locator
function. The siren will chirp 6 times. The parking light
will flash 12 times, for you to easily locate your car.

PANIC FUNCTION:

The transmitter can be used as a remote panic switch to manually
trigger the alarm in case emergency.

1. Press and hold the

button for 3 second. The alarm will

immediately sound.

2. To stop the alarm, press

or

button, the panic mode will be

turned off immediately.
3. If the button is not pressed, the alarm will automatically stop
after 30 seconds.


Advertising