Auto Page RF-520LCD User Manual
Page 16
16
Timer Setting: Example to AM10:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the
or
button to decrease or increase the “Hour” digit until AM10: xx
3. Press the
button once again then the “Minute” digit flashes for adjusting.
4. Press the
or
button to decrease or increase the “Minutes” digit until AM
10:30
5. Press the
button for 2 seconds with one-melody sound to confirm exit the
timer program mode.
Alert Alarm Timer Setting: Example to PM 6:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the
button twice, the LCD screen will shows
icon and “Hours” digit
is flashes for adjusting.
3. Press the
or
button to decrease or increase the “Hour” digit until PM 6:xx
4. Press the
button once again then the “Minutes” digit flashes for adjusting.
5. Press the
or
button to decrease or increase the “Minutes” digit until PM
6:30
6. Press the
button once again then
icon flashes for alert alarm “ON / OFF”
setting
7. Press the
button to start the “Alert Alarm Timer”, and the “ON” icon will show
on the LCD screen. Press the
button to stop the “Alert Alarm Timer”, and the
“OFF” icon will show on the LCD screen.
8. Press
button for 2 seconds with one-melody sound to confirm exit the timer
program mode.
Count Down Timer Setting: Example Set count down timer at 2:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the
button 5 times, the LCD screen will shows
icon and “Hours”
digit is flashes for adjusting.
3. Press the
or
button to decrease or increase the “Hour” digit until 2:xx
4. Press the
button once again then the “Minutes” digit flashes for adjusting.
5. Press the
or
button to decrease or increase the “Minute” digit until 2:30
6. Press the
button once again then
icon flashes for alert alarm “ON /
OFF” setting
7. Press the
button to start the count down timer, and the “ON” icon will show on
the LCD screen.
Press the
button to stop the count down timer, and the “OFF” icon will show
on the LCD screen.
8. Press the
button for 2 seconds with one-melody sound to confirm exit the
timer program mode.
Note: Maximum is 19 hours.