Ridetech 41230000 - Manual

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
TGR14500 64-67 GM “A” Body TigerCage
Basic Cage
1 T108-1 Main Hoop
1 T125D-1 Driver side hoop mount
1 T125P-1 Passenger side hoop floor mount
2 T121 Hoop mount “B” pillar reinforcement plate
1 T128D Driver side hoop to frame mount (inner)
1 T128P Passenger side hoop to frame mount (inner)
1 T124D-1 Driver side hoop to frame mount (outer)
1 T124P-1 Passenger side hoop to frame mount (outer)
1 T109-1 Driver side package tray bar
1 T110-1 Passenger side package tray bar
2 T116 Package tray reinforcement plate
1 T111-1 Driver side trunk bar
1 T112-1 Passenger side trunk bar
2 T127 Trunk bar to frame mount
2 T002 Clamp tabs
1 T037P TigerClamp P (threaded)
1 T038P TigerClamp P
1 T037D TigerClamp D (threaded)
1 T038D TigerClamp D
1 Tube of Anti-Seize
1 ENG34111 Polyurethane body mount kit
Hardware:
16 3/8” x 1” USS Gr. 8 SHCS Clamps / Main hoop to mount
44 3/8” x 1 ¼” USS Gr. 8 bolt Mounting brackets
4 3/8” x 1” self-tapping screws Mounting brackets
40 3/8” USS Gr.8 Nylok nut Mounting brackets
4 3/8” Lock washer Mounting brackets
88 3/8” SAE flat washer Mounting brackets
2 ½” x 1 ½” 12 point Gr. 8 bolt Bar to clamp tab
2 ½” Flange nut Bar to clamp tab
T125 T128 T092 T116 T121 T127