Speedtech Nova Subframe - Manual (Page 12)

12 | P a g e
Speedtech Sway Bar Install
11. Installation of the sway bar is
basically the same as any standard
sway bar. T polyurethane pivot
bushings/ mounting hardware are
included in the sway bar package. The
end link hardware is included with the
High Clearance lower control arms.
Mount the bar to the sub frame first,
bolting the pivot bushing brackets to
the vertical pads welded to the front
cross member. Then install the end
links with the supplied 3/8 hardware,
inserting the bolt through the washer,
poly bushing, sway bar, poly bushing,
and washer. Now add the 3/8 Jam nut,
then thread it into the rod end.
That completes the assembly of the sub frame. You now have the choice to
either install the sub frame into the car or continue to install the motor and
transmission into the sub frame, then install the entire assembly into the car.