Speedtech Nova Subframe User Manual
Page 18
18 |
P a g e
17. The sub frame has alignment holes located in the mid body mounts to
facilitate alignment of the sub frame once it is installed in the car, see position 1
in the figure below. Use a long alignment punch to move the sub assembly
around and square and align to the body. You must square and align the sub
frame in the equalizing the measurements on line “F” and then on line “G”.
Squaring it this way using both the front to back (G) and diagonal (F) methods
will endure the best possible frame to body alignment.
18. Once you have the frame squared and all body mount bolts tightened to 140
ft/lbs, reinstall and reconnect all accessories as they were before.
Do not drive the car until it has had a proper
suspension alignment.
Once you have completed the sub frame install, have the vehicle towed to a
competent professional alignment shop to have the alignment performed.
Note: Use alignment specifications on next page, not alignment shop
pre-programmed factory specs!