5 security security security security security – Asus Motherboard P5VD2-MX User Manual
Page 84
2 - 3 6
2 - 3 6
2 - 3 6
2 - 3 6
2 - 3 6
C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p
2.
Press any key to continue. The password field setting is changed to
Clear.
A n o t e a b o u t p a s s w o r d s
A n o t e a b o u t p a s s w o r d s
A n o t e a b o u t p a s s w o r d s
A n o t e a b o u t p a s s w o r d s
A n o t e a b o u t p a s s w o r d s
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to
boot the system preventing unauthorized use.
F o r g o t y o u r p a s s w o r d ?
F o r g o t y o u r p a s s w o r d ?
F o r g o t y o u r p a s s w o r d ?
F o r g o t y o u r p a s s w o r d ?
F o r g o t y o u r p a s s w o r d ?
If you forget your password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you need
to erase the CMOS RAM, refer to section “1.9 Jumpers” for
instructions.
2.6.5
2.6.5
2.6.5
2.6.5
2.6.5
Security
Security
Security
Security
Security
Select Menu
Item Specific Help
Boot Settings Configuration
Supervisor Password
Clear
User Password
Clear
Password Check
[Setup]
Phoenix-Award BIOS CMOS Setup Utility
Boot
PASSWORD DISABLED !!!
Press any key to continue...
Supervisor Password
Supervisor Password
Supervisor Password
Supervisor Password
Supervisor Password
User Password
User Password
User Password
User Password
User Password
These fields allow you to set passwords:
To set a password:
1.
Select an item then press <Enter>.
2.
Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press <Enter>.
3.
When prompted, confirm the password by typing the exact characters
again, then press <Enter>. The password field setting is changed to
Set.
To clear the password:
1.
Select the password field and press <Enter> twice. The following
message appears: