Telenav for AT&T Supported Devices: v4.1 for iPAQ 6920, 6925 - Manual (Page 10)

© TELENAV 2003-6 PAGE 10 OF 27
6. Addresses
This section discusses the variety of ways you can select a previously entered address, enter a new one, or use a
Business or Airport Address. This information is presented here since the techniques for setting addresses are
used throughout TeleNav.
Address Selector
TeleNav presents a list of options for you to choose from when a) setting a
destination address, b) setting an origin address, c) defining the center of a
displayed map, or d) anchoring a Business Finder search.
These options include: a) using an airport’s address, b) entering an address
from the keypad, c) verbally dictating an address to an automatic voice
recognition system, d) using the address of a business, e) using a Recent
City, Recent Stop, or a previously stored Location.
NOTE: One or more options may be omitted from the Address Selector list
depending upon the application context.
Recent Addresses
Recent Addresses are addresses used recently for navigation, directions,
business finder searches, or mapping. When the 24-item capacity of the list
is exceeded, the newest stop pushes the eldest off the list. When a stop in
the list is used within TeleNav, it is promoted to the head of the list.
Press Menu and select “Refresh” to pull in any addresses you entered on
the
www.TeleNav.com website Preplanning feature.
Recent Cities
The Recent Cities list is automatically extracted from the Recent Addresses.
Selecting a recent city transfers the city and state to the Address Input form
so all you need to do is add the street address.