Telenav for AT&T Supported Devices: v4.1 for iPAQ 6920, 6925 - Manual (Page 12)

© TELENAV 2003-6 PAGE 12 OF 27
provide the proper range of numbers for you to use. Provide a number that is within the range or nearest the end of
the range that you are sure is valid. If you say Intersection and then provide a crossing street name, the voice
system may advise you that the streets you provided do not actually cross and allow you to change either street
name, or both street names. Select the name you want to change by saying it, and then provide the correct name.
NOTE: If caller ID is not working, the Voice Address Input System will ask you for account number and PIN.
Simply dictate the numbers as prompted, or key in your mobile phone number followed by pressing “#”, and your
TeleNav PIN followed by pressing “#”.
NOTE: If you are already on a voice call, this feature will be disabled.
Using an Airport as an address
Click on Airport in the Address Selector. There is one input field, for either
the airport code, such as SFO for San Francisco International Airport or
optionally for the airport name, location city or market city prefix.
If you enter “NEW” in the name/city prefix field, the server will produce a list
of airports in NEW York City; NEWark, NJ; NEW Orleans; etc. You simply
highlight the one you want, and press the track wheel button to submit it.
Business Address
See the section regarding the Biz Finder feature for more detailed
information. To use the
Biz Finder to set an address: a) specify the search
point or area first, b) decide whether you want to search by Category or
Business Name, c) navigate through the categories if you selected Category
search until you have reached the list of matching businesses, d) select a
specific business, and e) display a list of options.
You can select to save the address, or use it in the current application
context. For example, if you are trying to get a Map, you can use Finder to
get a business address, and then get a Map around that address.
Recorded Locations
The Locations list appears to be similar to the Recent Stops list when it is
displayed. Waypoints are entered using the mark feature in TeleNav GPS
Tools, and from Maps.
When the 20-item capacity of the push down list is exceeded, the eldest
element on the list is removed when the new element is added. When
Locations are deleted from the list, the list is compressed.
Locations are not derived from knowledge of a street address, but Recent
Stops and Favorites are.