Telenav for AT&T Supported Devices: v4.1 for iPAQ 6920, 6925 - Manual (Page 23)

© TELENAV 2003-6 PAGE 23 OF 27
Preferences
If you select Preferences you can:
• Set the displayed Distance units to
either feet and miles or kilometers and
meters.
• Set the Route type to fastest or
shortest, using or avoiding highways or
select pedestrian routes.
• Turn the Backlight Always On or ON
at Turns.
• Set Nav Screen to preferred mode.
Help/About
The content of the Help/About screen is
shown on the below.
TIP: Have questions about TeleNav? We
have answers! TeleNav Customer Care is
available 24 hours a day, seven days a week.
For Customer Care, dial toll free 888-353-
6284.
Activity Messages
Whenever the TeleNav application on your handheld needs server assistance, it
uses your carrier’s data service. While it is using data service, other services
such as SMS messaging, and conventional cellular will not be available.
Typically this interruption of other services will last no more than 20 seconds.
When TeleNav is using data service to contact the TeleNav servers, it will
present a message like: a) Reading GPS…, b) Waiting …, c) Sending …, d)
Receiving…, e) Logging in…, f) Personalizing …, g) Loading … and h) Storing ..
Taking an Incoming Call
When your handheld receives an incoming call ring, it will ring, and display a screen that allows you to take or
ignore the call. Whether you decide to take the call or ignore the call, the application will continue as is when you
resume.
NOTE: When TeleNav briefly uses the carrier’s data network, incoming calls may be blocked.