Tivax MiTraveler 3D-8 - Manual (Page 11)

10.2 Wi-Fi setting and Wi-Fi network
Click “Scan” and system will search Wi-Fi network automatically and display signal
strength.
10.3 IP address setting and connecting: (You will normally only use the first option)
a. Auto Obtain IP address:
System default is IP address automatic. Click the target network name, and then input
password if it is required; e.g., click “KW” network as pictured below to pop up
Password Input Window, input password, and click it; after going through KW
network's verification, system will auto obtain IP address from KW network, as shown
in figure below:
b. Manually Obtain IP address:
Place a check mark in “Advanced” and select “Static” in “IP setting”; click “connect”
and the setting will be effective.
9