Tivax MiTraveler 3D-8 - Manual (Page 14)

including aspect ratios, better rendering and automatic notice of updates.
Updates for the 3DPlayer: By clicking ‘About’, you navigate to a screen with company
information and a ‘Check for Updates’ option. Clicking on this button prompts the Viren
server to inspect your tablet software to see whether any updates need to be installed.
A registered user can upgrade directly from VMP. The newest version will automatically
show an onscreen prompt when a new version is available (provided you are using its
Wi-Fi). NOTE: In rare cases if you cannot connect to update please set the date back to
2012 and that will let the player load.
Important note: Your 3D tablet uses an electro-optic technology known as a
‘parallax barrier’ to separate the left and right eye images for 3D stereoscopic
viewing. This is the same type of technology currently under development by
many of the top television manufacturers aimed at providing consumers with
‘glasses-free’ 3D. While those products are still years in the future, you can enjoy
it today with your device. An intrinsic feature of this technology is the formation
of ‘viewing zones’, commonly called ‘sweet spots’ which are defined by the angles
of viewing that provide 3D depth. On your tablet there are several such zones
which you will see as you adjust the tablet’s orientation for ideal viewing. Most
people find that a comfortable viewing distance is somewhere between 1ft and
2.5ft (30 to 75cm).
While normally the tablet will be used in a ‘single-user’ mode, it is possible for
more than one user, if seated appropriately close to the center viewing angle, to
share in the viewing experience. NOTE: The best 3D image is in the sweet spot 10
degrees to the left of center (tilt the right side of the tablet about 1 inch away
from you).
12