Tuff Country 14059 - GM 2014 Silverado 1500 4wd 4 lift kit - Manual (Page 6)

16. Working on the driver side, remove the lower hardware
securing the strut to the lower control arm. The hardware
may be discarded. Repeat procedure on the passenger side.
17. Working on the driver side, remove the upper clips off the
upper strut studs. Remove the nuts holding the strut into the
upper location and save. Remove the strut from the vehicle
and remove and discard the lower attaching clips. Set the
strut aside. Repeat procedure on the passenger side.
14. Working on the driver side, remove the sway bar end link
from the sway bar and lower control arm. Save the end link
and hardware. Repeat procedure on the passenger side.
15. Working on the driver side, remove the outer tie rod from
the OE knuckle. Save the hardware. Special note: Using a
hammer and striking the knuckle will help break the
taper. Take special care not to damage the outer tie rod
dust boot during removal. Repeat procedure on the pas-
senger side.