Tuff Country 14059 - GM 2014 Silverado 1500 4wd 4 lift kit User Manual
Page 8
21. Locate the new upper control arms. Locate (8) poly
bushings and (4) sleeves from hardware bag 14059PL.
Install the new bushings and sleeves into the new upper con-
trol arms. Special note: Make sure to use a fair amount of
lithium or moly base grease before installing the new
bushings and sleeves into the control arms. This will
increase the life of the bushing as well as help prevent
squeaking.
22. Locate (4) SERT04 from hardware bag 14059NB. Install
the new sert fittings to the new upper control arm. Special
note: Take special care not to cross thread during instal-
lation and make sure not to over tighten. Hand tighten
with an end wrench. Also, make sure that once installed
the sert fitting is facing the outside of the vehicle so it
will be easy to access with a grease gun.
23. Working on the driver side, install the new upper control
arm into the OE location using the OE cam bolts. Do not
tighten at this point. Repeat procedure on the passenger
side.