Tuff Country 56901 - Toyota Tacoma 05-14 performance 6 lift kit - Manual (Page 10)

33. Locate (1) 1/2” x 3 1/2” bolt, (2) 7/16” USS flat washers
and (1) 1/2” unitorque nut from 56900NB hardware bag #2.
Use this new hardware to secure the driver side differential
bracket into the tabs on the new front cross member.
Special note: Do not tighten bolt at this time.
34. Locate (2) 1/2” x 3 1/2” bolts, (4) 7/16” USS flat washers
and (2) 1/2” unitorque nuts from 56900NB hardware bag #2.
Use this hardware to secure the passenger side differential
bracket into the tabs on the new front cross member and the
tabs on the rear cross member. Special note: Do not tight-
en bolts at this time.
35. Locate the stock allen head nut that connect front differ-
ential to the stock rear cross member. Working on the driver
side of the new rear cross member, install the stock allen
head nut onto the threaded stud of the differential. Special
note: Do not tighten nut at this time.
36. Locate (6) 7/16” x 1 1/4” bolts, (12) 3/8” USS flat wash-
ers, and (6) 7/16” unitorque nuts from hardware bag
56900NB bag # 2. Also, locate the new front lower skid plate.
Install the new lower skid plate using the new hardware to
secure it to the front and rear cross members. Special note:
Do not tighten bolts at this time.