Atek electronic Stagehand RM200 - Manual (Page 12)

Stagehand User’s Manual, page 11
Reprogram up and down buttons
The default settings for the up and down buttons are:
Up button = page up command
Down button = page down command
The buttons can be reprogrammed, but only as a pair of changes, not individually.
To reprogram, push and hold the function button, and without releasing, push BOTH
the up button AND the down button (AT THE SAME TIME) within two seconds.
If you do not push the up button and down button within two seconds, you will invoke
the black screen function instead.
If you push only the up button or only the down button, you will invoke the exit slide
show function instead.
The LED illumination light will immediately flash three times to confirm the change.
The first time you do this procedure, the programming will change to:
Up button = page down command
Down button = page up command
If you do it again, the programming will change to:
Up button = arrow up command
Down button = arrow down command
If you do it again, the programming will change to:
Up button = arrow down command
Down button = arrow up command
If you do it again, the programming will change to the default setting.
Operation