Atek electronic Stagehand RM200 - Manual (Page 6)

Stagehand User’s Manual, page 5
• Power, signal, and reprogramming LED indications on USB receiver provide useful
feedback. Note: the USB receiver is not a flash memory drive and cannot be used to
store presentations.
• On/off switch extends battery life and prevents battery drain caused by
unintentional button pushing when carrying or storing the product.
• Control one computer with multiple remote controls or control multiple computers
with one remote control (purchase of multiple sets required).
• ID codes set to random values at factory to decrease chance of conflicts among
multiple Stagehand remote controls operating in adjacent rooms, such as in schools.
The ID codes are reprogrammable just in case a highly unlikely conflict occurs.
• Channel can be reprogrammed in case of interference between your Stagehand and
other radio frequency (RF) devices.
• Reprogrammable up and down buttons.
• Optional neck lanyard with quick release buckle provides a convenient way to avoid
setting the remote control down during a presentation and forgetting where it is.
• Travel pouch with internal slot for USB receiver for convenient storage of remote
control and receiver.
See Operation section for details.
Features