Actron KAL9640B - Manual (Page 112)

Chrysler Diagnostics
7 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7
The Record Data function allows diagnosis of an intermittent problem by
analyzing data leading up to the problem, during the problem, and possibly after
the problem, depending on duration.
Select Record Data from the Chrysler
Functions list and press ENTER.
Follow all instructions on the display.
✓
The tool can maintain only one recording at a time. Be sure to thoroughly
review the old recording before erasing it.
If a recording currently exists in memory,
a message to Erase Old Recording is
displayed. The tool stores only one
recording at a time, so be sure to review
it before erasing it.
✓
On 1999 and newer vehicles, a screen may ask you to select Engine Data
or Transmission Data.
Next, turn the ignition key On. Engine can be Off or Running.
Never operate the tool while driving. Have another person
assist with the operation of the tool.
Refer to “Viewing Data” on page 3-9 of
Using The Scan Tool for Entire and
Custom Data Lists.
On the next screen, select a triggering
method. Manual Trigger allows the
technician to use the ENTER key.
Trigger On Codes automatically
triggers when a DTC is indicated by the
vehicle.
Press ENTER and the scan tool
establishes a communication link with
the vehicle.
If Manual Trigger is selected, the scan
tool initializes by recording the first five
frames. When done, press ENTER.
Chrysler Functions ?
4)View Data ]
` 5)Record Data [
6)Switch Test ~
Cannot Record. Old
Recording Filled Up
Memory. Erase Old?
~
! CAUTION
Select Record Data: ?
` Entire Data List
Custom Data List
~
Pick Trigger Method
`1)Manual Trigger
2)Trigger On Codes
** INITIALIZING **
PRETRIG FRAME:-5
BACK To Exit
~
**Ready To Record**
Press ENTER Anytime
To Start Recording.
Stops Automatically
~