Actron KAL9640B - Manual (Page 96)

Ford Enhanced (OBD II) Diagnostics
6 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
6
If DTCs are found, use the DOWN arrow
key to view them.
Write down the DTCs for reference and
then press BACK to return to the Ford
Function List.
Read All DTC
The Read All DTC function retrieves all DTCs (MIL, non-MIL, Pending and
Memory) stored in the vehicle’s computer module(s). This function can be
performed with the KOEO or KOER.
Select Read All DTC and press
ENTER. The Scan Tool retrieves the
DTCs stored in the vehicle’s computer
module(s).
If a message displays stating SYSTEM
PASS: NO DTCS FOUND, press the
FUNC key to return to the Ford
Function List.
If DTCs are found, use the DOWN arrow
key to view them.
Write down the DTCs for reference. Use
the UP/DOWN arrow keys to review the
DTCs.
Press FUNC to return to the Ford
Function List.
Pending Codes
Refer to “Pending Codes” on page 4-4 of Global OBDII Diagnostics.
DTCs Found: 3
Use [ To View DTCs
Write Down Codes
For Reference ~
DTC P0107
MAP/BARO
Circuit Low Input
[
~
Ford Function List ?
1)I/M Readiness
2)Read MIL DTC
[
` 3)Read All DTC ~
System Pass:
No DTCs Found
~
DTCs Found: 2
Use [ To View DTCs
Write Down Codes
For Reference ~
DTC P0110
Intake Air Temp
Circuit Malfunction [
~