Axis Communications 660 - Manual (Page 17)

Setup for Windows 3.1 & WfW AXIS 560/660 User’s Guide 16
Setup for Windows 3.1 & WfW
TCP/IP Printing
To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups
environments, it is recommended that you use a shareware LPR spooler that can be
downloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.
NetBIOS/NetBEUI Printing
AXIS Print Utility for Windows is the preferred tool for NetBIOS/NetBEUI printing
in Windows 3.1 and Windows for Workgroups environments.
Install the AXIS Print Utility for Windows software, if you have not already done so.
It is supplied in the software\prt_srv\utility\axpuw\1.04 folder on the AXIS Online
CD. You can also download it from the Axis WWW home page at
http://www.axis.com/.
Peer-to-peer printing - This print method is recommended for smaller
networks and requires that all users install the AXIS Print Utility for Windows on
their workstations. Follow these steps to install your AXIS 560/660 for peer-to-peer
printing at a Windows for Workgroups or Windows 3.1 workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add. In the NPS Port list, select the AXIS 560/660 port
to be installed. The ports appear as <name>.LP1 , <name>.LP2 , and
<name>.CM1 , where <name> is either AX followed by the last six digits of the
AXIS 560/660 serial number or a name you have previously given the AXIS
560/660. For example:
AX100B35.LP1 or DevDept.LP1 .
3. Accept or change the suggested Windows port name, and type any comments in
the Description field. Make a note of the Windows port name as you will need
this later. Click OK to install the Windows port.
4. In the Port menu, click Connect to bring up the Windows Printers dialog.
5. Select a printer driver from the list of Installed Printers, or click Add>> to install
a new driver. Click Connect...
6. Select the Windows port name, defined in step 3, from the Ports list.
7. Click OK to close the Connect dialog, and Close to close Printers.
Wi
n
d
o
w
s