Axis Communications 660 - Manual (Page 20)

AXIS 560/660 User’s Guide Setup for Macintosh 19
Setup for Macintosh
Note:
Follow the instructions below to choose a printer:
1. Open the Chooser from the Apple menu.
2. Click the LaserWriter, alternatively the LaserWriter 8.0 Icon.
3. If your network has more than one zone, click the name of the default zone. If
your network has no zones, this box does not appear.
4. Click the name of the printer you want to use. The default printer name is shown
as: AXIS<nnnnnn>_<port> , where <nnnnnn> is the last six digits of the
serial number, and <port> is LPT1, LPT2, or COM1 respectively.
5. For LaserWriter 8.0 printer driver only:
Click Setup..., and then Select Auto Setup. If the printer, as well as the print
server, supports bi-directional printing the installation will be automatically per-
formed. If not, you will be prompted to select a PPD file matching your printer.
Click OK.
6. Click the Close box. This completes the configuration.
Repeat this procedure for each Macintosh using the AXIS 560/660.
Only AXIS 560 supports printing in the Macintosh environment.
Ma
ci
ntosh