Axis Communications 660 User Manual
Page 21
Setup for Macintosh
AXIS 560/660 User’s Guide
20
Setting the IP address
Follow the step-by-step procedure below to set the IP address, enabling access to the
AXIS 560 via any standard Web browser:
1. Open the Chooser and select a network printer driver, any LaserWriter will do.
2. Select the Axis printer port which name ends with "_CFG" and close the
Chooser.
3. Open a text editor, e.g. SimpleText and write a text file containing the following:
INT_ADDR: <IP address>
Example:
4. Print the above text file. The settings will be stored in the AXIS 560.
5. Open the Chooser and select the printer port you wish to use for printing
documents. Close the Chooser.
Note:
INT_ADDR: 171.16.2.143
The _CFG port disappears 60 minutes after the AXIS 560 has been powered on. If you want it to
reappear, you must restart the AXIS 560.
Ma
ci
nt
osh