Monoprice 6660 8-channel Security DVR - Manual (Page 36)

36
Installation and user manual
Video Type
Video Type can set in this menu without rebooting or initialisation. The default is PAL, NTSC
can also be selected
System ID
The remote control can be used to control up to 16 DVRs, the ID number on each can be set
to a unique address so that the remote will only control one at a time if they are in close
proximity. The default is 11.
Repeated click
on the ID value to change to the required number.
To select a unit on the
remote control press the ID button, followed by the
number, followed by the ID button again. The LED will flash slowly.
Initialization
All the menu settings will be returned to the factory default. To carry out this function the
system recording will have to be turned off.
Information
The Information Screen shows the hard disk size, current firmware revisions, IP address and
MAC address
LED