Monoprice 6660 8-channel Security DVR - Manual (Page 50)

50
Installation and user manual
5. Event
This section is used to inform the user as to an event occurring, this can be by the sounding
of a buzzer or by sending an E-mail to a predefined address.
[ E-Mail Registration ]
Within this section up to 3 users can be set-up to receive an email on the occurrence of an
event such as Video Loss / Alarm / Motion or Power Loss. An E-mail will only be sent if the
E4000 is sitting on a network with access to the Internet, e.g. through a router.
The e-mail addresses are set via the alphanumeric buttons on the front panel, or from the on
screen keyboard via the mouse.
The Sender Address is the address that will appear on the E-mail received by the user, this
should be set logically to identify the specific DVR.
The report period is used to set how often e-mails are sent: Immediately on and event, Daily
or Weekly
SEND TEST MAIL sends a test E-mail to the addresses so allowing the installer to verify if
the setup is correct
.